CONS(3) CONS(3)
NAME
cons - console, clocks, process/process group ids, user,
null, reboot, etc.
SYNOPSIS
bind #c /dev
/dev/bintime
/dev/config
/dev/cons
/dev/consctl
/dev/cputime
/dev/drivers
/dev/hostdomain
/dev/hostowner
/dev/kmesg
/dev/kprint
/dev/mach
/dev/null
/dev/osversion
/dev/pgrpid
/dev/pid
/dev/ppid
/dev/random
/dev/reboot
/dev/swap
/dev/sysname
/dev/sysstat
/dev/time
/dev/user
/dev/zero
DESCRIPTION
The console device serves a one-level directory giving
access to the console and miscellaneous information.
Reading the cons file returns characters typed on the key-
board. Normally, characters are buffered to enable erase
and kill processing. A control-U, `^U', typed at the key-
board kills the current input line (removes all characters
from the buffer of characters not yet read via cons), and a
backspace erases the previous non-kill, non-erase character
from the input buffer. Killing and erasing only delete
characters back to, but not including, the last newline.
Characters typed at the keyboard actually produce runes (see
utf(6)), but the runes are translated into the variable-
length UTF encoding (see utf(6)) before putting them into
the buffer. A read(2) of length greater than zero causes
the process to wait until a newline or a `^D' ends the
buffer, and then returns as much of the buffer as the
Page 1 Plan 9 (printed 12/21/24)
CONS(3) CONS(3)
argument to read allows, but only up to one complete line.
A terminating `^D' is not put into the buffer. If part of
the line remains, the next read will return bytes from that
remainder and not part of any new line that has been typed
since.
If the string rawon has been written to the consctl file and
the file is still open, cons is in raw mode: characters are
not echoed as they are typed, backspace, `^U' and `^D' are
not treated specially, and characters are available to read
as soon as they are typed. Ordinary mode is reentered when
rawoff is written to consctl or this file is closed.
A write (see read(2)) to cons causes the characters to be
printed on the console screen.
The osversion file contains a textual representation of the
operating system's version and parameters. At the moment,
it contains one field: the 9P protocol version, currently
2000.
The config file contains a copy of the kernel configuration
file used to build the kernel.
The kmesg file holds the last 16 kilobytes of output written
to the console by the kernel's print statements or by pro-
cesses writing to /dev/cons. It is useful for retrieving
boot messages once the boot process is over.
The kprint file may be read to receive a copy of the data
written to the console by the kernel's print statements or
by processes writing to /dev/cons. Only data written after
the file is opened is available. If the machine's console
is a serial line, the data is sent both to the console and
to kprint; if its console is a graphics screen, the data is
sent either to the display or to kprint, but not both. (It
is advisable not to open kprint on terminals until you have
started rio(1).)
The mach file returns the current core number, which is only
accurate if the process is wired. See proc(3) for details.
The null file throws away anything written to it and always
returns zero when read.
The zero file is a read-only file that produces an infinite
stream of zero-valued bytes when read.
The drivers file contains, one per line, a listing of the
drivers configured in the kernel, in the format
#c cons
Page 2 Plan 9 (printed 12/21/24)
CONS(3) CONS(3)
The hostdomain file contains the name of the authentication
domain that this host belongs to; see authsrv(6). Only the
user named in /dev/hostowner may write this.
The hostowner file contains the name of the user that owns
the console device files. The hostowner also has group per-
missions for any local devices.
Reads from random return a stream of random numbers. The
numbers are generated by a low priority kernel process that
loops incrementing a variable. Each clock tick the variable
is sampled and, if it has changed sufficiently, the last few
bits are appended to a buffer. This process is inefficient
at best producing at most a few hundred bits a second.
Therefore, random should be treated as a seed to pseudo-
random number generators which can produce a faster rate
stream.
Writing the string reboot to reboot causes the system to
shutdown and, if possible, restart. Writing the string
reboot kernelpath loads the named kernel image and restarts,
preserving the kernel configuration in #ec, except that the
bootfile variable is set to kernelpath. Only the host owner
has the ability to open this file.
Bintime is a binary interface that provides the same infor-
mation as time (q.v.), in binary form, and also controls
clock frequency and clock trim. All integers read or writ-
ten from bintime are in big endian order. Unlike the other
files, reads and writes do not affect the offset. There-
fore, there is no need for a seek back to zero between sub-
sequent accesses. A read of bintime returns 24 bytes, three
8 byte numbers, representing nanoseconds since start of
epoch, clock ticks, and clock frequency.
A write to bintime is a message with one of 3 formats:
n<8-byte time>
set the nanoseconds since epoch to the given
time.
d<8-byte delta><4-byte period>
trim the nanoseconds since epoch by delta over
the next period seconds.
f<8-byte freq>
Set the frequency for interpreting clock ticks
to be freq ticks per second.
Statistics and Dynamic Status
The rest of the files contain (mostly) read-only strings.
Each string has a fixed length: a read(2) of more than that
Page 3 Plan 9 (printed 12/21/24)
CONS(3) CONS(3)
gives a result of that fixed length (the result does not
include a terminating zero byte); a read of less than that
length leaves the file offset so the rest of the string (but
no more) will be read the next time. To reread the file
without closing it, seek must be used to reset the offset.
When the file contains numeric data each number is formatted
in decimal. If the binary number fits in 32 bits, it is
formatted as an 11 digit decimal number with leading blanks
and one trailing blank; totaling 12 bytes. Otherwise, it is
formatted as 21 digit decimal numbers with leading blanks
and one trailing blank; totaling 22 bytes.
The cputime file holds six 32-bit numbers, containing the
time in milliseconds that the current process has spent in
user mode, system calls, real elapsed time, and then the
time spent, by exited children and their descendants, in
user mode, system calls, and real elapsed time.
The time file holds one 32-bit number representing the sec-
onds since start of epoch and three 64-bit numbers, repre-
senting nanoseconds since start of epoch, clock ticks, and
clock frequency.
A write of a decimal number to time will set the seconds
since epoch.
The sysname file holds the textual name of the machine, e.g.
kremvax, if known.
The sysstat file holds 10 numbers: processor number, context
switches, interrupts, system calls, page faults, TLB faults,
TLB purges, load average, idle time and time spent servicing
interrupts. The load average is in units of milli-CPUs and
is decayed over time; idle time and interrupt time are per-
centage units; the others are total counts from boot time.
If the machine is a multiprocessor, sysstat holds one line
per processor. Writing anything to sysstat resets all of
the counts on all processors.
The swap device holds a text block giving memory usage
statistics:
n memory
n pagesize
n kernel
n/m user
n/m swap
n/m kernel malloc
n/m kernel draw
These are total memory (bytes), system page size (bytes),
kernel memory (pages), user memory (pages), swap space
Page 4 Plan 9 (printed 12/21/24)
CONS(3) CONS(3)
(pages), kernel malloced data (bytes), and kernel graphics
data (bytes). The expression n/m indicates n used out of m
available. These numbers are not blank padded.
To turn on swapping, write to swap the textual file descrip-
tor number of a file or device on which to swap. See
swap(8).
The other files served by the cons device are all single
numbers:
pgrpid process group number
pid process number
ppid parent's process number
SEE ALSO
draw(3), keyboard(6), authsrv(6), utf(6), swap(8)
SOURCE
/sys/src/9/port/devcons.c
BUGS
For debugging, two control-T's followed by a letter generate
console output and manage debugging: `^T^Td' toggles whether
the console debugger will be run if the system fails.
`^T^TD' starts the console debugger immediately. `^T^Tk'
kills the largest process; use with care. `^T^Tp' prints
data about processes. `^T^Tq' prints the run queue for pro-
cessor 0. `^T^Ts' prints the kernel stack. `^T^Tx' prints
data about kernel memory allocation.
The system can be rebooted by typing `^T^Tr'.
Page 5 Plan 9 (printed 12/21/24)