STYX(10.2) STYX(10.2)
NAME
Fcall, convS2M, convD2M, convM2S, convM2D, fcallfmt, dirfmt,
dirmodefmt, statcheck, sizeS2M, sizeD2M - interface to
Inferno File protocol
SYNOPSIS
#include <lib9.h>
#include <styx.h>
uint convS2M(Fcall *f, uchar *ap, uint nap)
uint convD2M(Dir *d, uchar *ap, uint nap)
uint convM2S(uchar *ap, uint nap, Fcall *f)
uint convM2D(uchar *ap, uint nap, Dir *d, char *strs)
int dirfmt(Fmt*)
int fcallfmt(Fmt*)
int dirmodefmt(Fmt*)
int statcheck(uchar *buf, uint nbuf)
uint sizeS2M(Fcall *f)
uint sizeD2M(Dir *d)
DESCRIPTION
These routines convert messages in the machine-independent
format of the Inferno file protocol, described by intro(5),
to and from a more convenient form, an Fcall structure:
#define MAXWELEM 16
typedef
struct Fcall
{
uchar type;
u32int fid;
ushort tag;
union {
struct {
u32int msize;/* Tversion, Rversion */
char *version; /* Tversion, Rversion */
};
struct {
ushort oldtag;/* Tflush */
};
Page 1 Plan 9 (printed 12/21/24)
STYX(10.2) STYX(10.2)
struct {
char *ename; /* Rerror */
};
struct {
Qid qid; /* Rattach, Ropen, Rcreate */
u32int iounit;/* Ropen, Rcreate */
};
struct {
Qid aqid; /* Rauth */
};
struct {
u32int afid;/* Tauth, Tattach */
char *uname; /* Tauth, Tattach */
char *aname; /* Tauth, Tattach */
};
struct {
u32int perm;/* Tcreate */
char *name; /* Tcreate */
uchar mode; /* Tcreate, Topen */
};
struct {
u32int newfid;/* Twalk */
ushort nwname;/* Twalk */
char *wname[MAXWELEM]; /* Twalk */
};
struct {
ushort nwqid;/* Rwalk */
Qid wqid[MAXWELEM]; /* Rwalk */
};
struct {
vlong offset; /* Tread, Twrite */
u32int count;/* Tread, Twrite, Rread */
char *data; /* Twrite, Rread */
};
struct {
ushort nstat;/* Twstat, Rstat */
uchar *stat; /* Twstat, Rstat */
};
};
} Fcall;
/* these are implemented as macros */
uchar GBIT8(uchar*)
ushort GBIT16(uchar*)
ulong GBIT32(uchar*)
vlong GBIT64(uchar*)
void PBIT8(uchar*, uchar)
void PBIT16(uchar*, ushort)
void PBIT32(uchar*, ulong)
void PBIT64(uchar*, vlong)
Page 2 Plan 9 (printed 12/21/24)
STYX(10.2) STYX(10.2)
#define BIT8SZ 1
#define BIT16SZ 2
#define BIT32SZ 4
#define BIT64SZ 8
This structure is defined in <styx.h>. See section 5 for a
full description of 9P messages and their encoding. For all
message types, the type field of an Fcall holds one of
Tversion, Rversion, Tattach, Rattach, etc. (defined in an
enumerated type in <styx.h>). Fid is used by most messages,
and tag is used by all messages. The other fields are used
selectively by the message types given in comments.
ConvM2S takes a 9P message at ap of length nap, and uses it
to fill in Fcall structure f. If the passed message includ-
ing any data for Twrite and Rread messages is formatted
properly, the return value is the number of bytes the mes-
sage occupied in the buffer ap, which will always be less
than or equal to nap; otherwise it is 0. For Twrite and
Tread messages, data is set to a pointer into the argument
message, not a copy.
ConvS2M does the reverse conversion, turning f into a mes-
sage starting at ap. The length of the resulting message is
returned. For Twrite and Rread messages, count bytes start-
ing at data are copied into the message.
The constant IOHDRSZ is a suitable amount of buffer to
reserve for storing the 9P header; the data portion of a
Twrite or Rread will be no more than the buffer size negoti-
ated in the Tversion/Rversion exchange, minus IOHDRSZ.
The routine sizeS2M returns the number of bytes required to
store the machine-independent representation of the Fcall
structure f, including its initial 32-bit size field. In
other words, it reports the number of bytes produced by a
successful call to convS2M.
Another structure is Dir, used by C functions in much the
same way as the Limbo versions described in sys-stat(2).
ConvM2D converts the machine-independent form starting at ap
into d and returns the length of the machine-independent
encoding. The strings in the returned Dir structure are
stored at successive locations starting at strs. Usually
strs will point to storage immediately after the Dir itself.
It can also be a nil pointer, in which case the string
pointers in the returned Dir are all nil; however, the
return value still includes their length.
ConvD2M does the reverse translation, also returning the
length of the encoding. If the buffer is too short, the
return value will be BIT16SZ and the correct size will be
Page 3 Plan 9 (printed 12/21/24)
STYX(10.2) STYX(10.2)
returned in the first BIT16SZ bytes. (If the buffer is less
than BIT16SZ, the return value is zero; therefore a correct
test for complete packing of the message is that the return
value is greater than BIT16SZ). The macro GBIT16 can be
used to extract the correct value. The related macros with
different sizes retrieve the corresponding-sized quantities.
PBIT16 and its brethren place values in messages. With the
exception of handling short buffers in convD2M, these macros
are not usually needed except by internal routines.
Analogous to sizeS2M, sizeD2M returns the number of bytes
required to store the machine-independent representation of
the Dir structure d, including its initial 16-bit size
field.
The routine statcheck checks whether the nbuf bytes of buf
contain a validly formatted machine-independent Dir entry.
It checks that the sizes of all the elements of the the
entry sum to exactly nbuf, which is a simple but effective
test of validity. Nbuf and buf should include the second
two-byte (16-bit) length field that precedes the entry when
formatted in a 9P message (see stat(5)); in other words,
nbuf is 2 plus the sum of the sizes of the entry itself.
Statcheck also verifies that the length field has the cor-
rect value (that is, nbuf-2). It returns 0 for a valid
entry and -1 for an incorrectly formatted entry.
Dirfmt, fcallfmt, and dirmodefmt are formatting routines,
suitable for fmtinstall(10.2). They convert Dir*, Fcall*,
and long values into string representations of the directory
buffer, Fcall buffer, or file mode value. Fcallfmt assumes
that dirfmt has been installed with format letter `D' and
dirmodefmt with format letter `M'. They currently cannot be
used in the kernels because they clash with the use of for-
mat `D' for Dis instructions.
SOURCE
/lib9/convM2D.c
/lib9/convM2D.c
/lib9/convM2S.c
/lib9/convS2M.c
/lib9/fcallfmt.c
/libkern/convM2D.c
/libkern/convM2D.c
/libkern/convM2S.c
/libkern/convS2M.c
/libkern/fcallfmt.c
SEE ALSO
intro(2), styx(2), sys-stat(2), intro(5)
Page 4 Plan 9 (printed 12/21/24)