SAM(1) SAM(1)
NAME
sam, B, E, sam.save, samterm, samsave - screen editor with
structural regular expressions
SYNOPSIS
sam [ option ... ] [ files ]
sam -r machine
sam.save
B file[:line] ...
E file
DESCRIPTION
Sam is a multi-file editor. It modifies a local copy of an
external file. The copy is here called a file. The files
are listed in a menu available through mouse button 3 or the
n command. Each file has an associated name, usually the
name of the external file from which it was read, and a
`modified' bit that indicates whether the editor's file
agrees with the external file. The external file is not
read into the editor's file until it first becomes the cur-
rent file-that to which editing commands apply-whereupon its
menu entry is printed. The options are
-a Autoindent. In this mode, when a newline charac-
ter is typed in the terminal interface, samterm
copies leading white space on the current line to
the new line.
-d Do not `download' the terminal part of sam. Edit-
ing will be done with the command language only,
as in ed(1).
-r machine Run the host part remotely on the specified
machine, the terminal part locally.
-s path Start the host part from the specified file on
the remote host. Only meaningful with the -r
option.
-t path Start the terminal part from the specified file.
Useful for debugging.
Regular expressions
Regular expressions are as in regexp(7) with the addition of
\n to represent newlines. A regular expression may never
contain a literal newline character. The empty regular
expression stands for the last complete expression encoun-
tered. A regular expression in sam matches the longest
leftmost substring formally matched by the expression.
Searching in the reverse direction is equivalent to
Page 1 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
searching backwards with the catenation operations reversed
in the expression.
Addresses
An address identifies a substring in a file. In the follow-
ing, `character n' means the null string after the n-th
character in the file, with 1 the first character in the
file. `Line n' means the n-th match, starting at the begin-
ning of the file, of the regular expression `.*\n?'. All
files always have a current substring, called dot, that is
the default address.
Simple Addresses
#n The empty string after character n; #0 is the beginning
of the file.
n Line n; 0 is the beginning of the file.
/regexp/
?regexp?
The substring that matches the regular expression,
found by looking toward the end (/) or beginning (?)
of the file, and if necessary continuing the search
from the other end to the starting point of the search.
The matched substring may straddle the starting point.
When entering a pattern containing a literal question
mark for a backward search, the question mark should be
specified as a member of a class.
0 The string before the first full line. This is not
necessarily the null string; see + and - below.
$ The null string at the end of the file.
. Dot.
' The mark in the file (see the k command below).
"regexp"
Preceding a simple address (default .), refers to the
address evaluated in the unique file whose menu line
matches the regular expression.
Compound Addresses
In the following, a1 and a2 are addresses.
a1+a2 The address a2 evaluated starting at the end of a1.
a1-a2 The address a2 evaluated looking in the reverse
direction starting at the beginning of a1.
a1,a2 The substring from the beginning of a1 to the end of
a2. If a1 is missing, 0 is substituted. If a2 is
missing, $ is substituted.
a1;a2 Like a1,a2, but with a2 evaluated at the end of, and
dot set to, a1.
Page 2 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
The operators + and - are high precedence, while , and ; are
low precedence.
In both + and - forms, if a2 is a line or character address
with a missing number, the number defaults to 1. If a1 is
missing, `.' is substituted. If both a1 and a2 are present
and distinguishable, + may be elided. a2 may be a regular
expression; if it is delimited by `?''s, the effect of the +
or - is reversed.
It is an error for a compound address to represent a mal-
formed substring. Some useful idioms: a1+- (a1-+) selects
the line containing the end (beginning) of a1. 0/regexp/
locates the first match of the expression in the file. (The
form 0;// sets dot unnecessarily.) ./regexp/// finds the
second following occurrence of the expression, and
.,/regexp/ extends dot.
Commands
In the following, text demarcated by slashes represents text
delimited by any printable character except alphanumerics.
Any number of trailing delimiters may be elided, with multi-
ple elisions then representing null strings, but the first
delimiter must always be present. In any delimited text,
newline may not appear literally; \n may be typed for new-
line; and \/ quotes the delimiter, here `/'. Backslash is
otherwise interpreted literally, except in s commands.
Most commands may be prefixed by an address to indicate
their range of operation. Those that may not are marked
with a `*' below. If a command takes an address and none is
supplied, dot is used. The sole exception is the w command,
which defaults to 0,$. In the description, `range' is used
to represent whatever address is supplied. Many commands
set the value of dot as a side effect. If so, it is always
set to the `result' of the change: the empty string for a
deletion, the new text for an insertion, etc. (but see the s
and e commands).
Text commands
a/text/
or
a
lines of text
. Insert the text into the file after the range. Set
dot.
c
i Same as a, but c replaces the text, while i inserts
before the range.
d Delete the text in the range. Set dot.
Page 3 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
s/regexp/text/
Substitute text for the first match to the regular
expression in the range. Set dot to the modified
range. In text the character & stands for the string
that matched the expression. Backslash behaves as usual
unless followed by a digit: \d stands for the string
that matched the subexpression begun by the d-th left
parenthesis. If s is followed immediately by a number
n, as in s2/x/y/, the n-th match in the range is sub-
stituted. If the command is followed by a g, as in
s/x/y/g, all matches in the range are substituted.
m a1
t a1 Move (m) or copy (t) the range to after a1. Set dot.
Display commands
p Print the text in the range. Set dot.
= Print the line address and character address of the
range.
=# Print just the character address of the range.
File commands
* b file-list
Set the current file to the first file named in the
list that sam also has in its menu. The list may be
expressed <Plan 9 command in which case the file names
are taken as words (in the shell sense) generated by
the Plan 9 command.
* B file-list
Same as b, except that file names not in the menu are
entered there, and all file names in the list are exam-
ined.
* n Print a menu of files. The format is:
' or blank indicating the file is modified or clean,
- or + indicating the file is unread or has been
read (in the terminal, * means more than one
window is open),
. or blank indicating the current file,
a blank,
and the file name.
* D file-list
Delete the named files from the menu. If no files are
named, the current file is deleted. It is an error to
D a modified file, but a subsequent D will delete such
a file.
I/O Commands
* e filename
Replace the file by the contents of the named external
file. Set dot to the beginning of the file.
r filename
Replace the text in the range by the contents of the
Page 4 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
named external file. Set dot.
w filename
Write the range (default 0,$) to the named external
file.
* f filename
Set the file name and print the resulting menu entry.
If the file name is absent from any of these, the current
file name is used. e always sets the file name; r and w do
so if the file has no name.
< Plan 9-command
Replace the range by the standard output of the Plan 9
command.
> Plan 9-command
Send the range to the standard input of the Plan 9 com-
mand.
| Plan 9-command
Send the range to the standard input, and replace it by
the standard output, of the Plan 9 command.
* ! Plan 9-command
Run the Plan 9 command.
* cd directory
Change working directory. If no directory is speci-
fied, $home is used.
In any of <, >, | or !, if the Plan 9 command is omitted the
last Plan 9 command (of any type) is substituted. If sam is
downloaded (using the mouse and raster display, i.e. not
using option -d), ! sets standard input to /dev/null, and
otherwise unassigned output (stdout for ! and >, stderr for
all) is placed in /tmp/sam.err and the first few lines are
printed.
Loops and Conditionals
x/regexp/ command
For each match of the regular expression in the range,
run the command with dot set to the match. Set dot to
the last match. If the regular expression and its
slashes are omitted, `/.*\n/' is assumed. Null string
matches potentially occur before every character of the
range and at the end of the range.
y/regexp/ command
Like x, but run the command for each substring that
lies before, between, or after the matches that would
be generated by x. There is no default regular expres-
sion. Null substrings potentially occur before every
character in the range.
* X/regexp/ command
For each file whose menu entry matches the regular
expression, make that the current file and run the com-
mand. If the expression is omitted, the command is run
in every file.
* Y/regexp/ command
Page 5 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
Same as X, but for files that do not match the regular
expression, and the expression is required.
g/regexp/ command
v/regexp/ command
If the range contains (g) or does not contain (v) a
match for the expression, set dot to the range and run
the command.
These may be nested arbitrarily deeply, but only one
instance of either X or Y may appear in a single command.
An empty command in an x or y defaults to p; an empty com-
mand in X or Y defaults to f. g and v do not have defaults.
Miscellany
k Set the current file's mark to the range. Does not
set dot.
* q Quit. It is an error to quit with modified files,
but a second q will succeed.
* u n Undo the last n (default 1) top-level commands that
changed the contents or name of the current file,
and any other file whose most recent change was
simultaneous with the current file's change. Suc-
cessive u's move further back in time. The only
commands for which u is ineffective are cd, u, q, w
and D. If n is negative, u `redoes,' undoing the
undo, going forwards in time again.
(empty) If the range is explicit, set dot to the range. If
sam is downloaded, the resulting dot is selected on
the screen; otherwise it is printed. If no address
is specified (the command is a newline) dot is
extended in either direction to line boundaries and
printed. If dot is thereby unchanged, it is set to
.+1 and printed.
Grouping and multiple changes
Commands may be grouped by enclosing them in braces {}.
Commands within the braces must appear on separate lines (no
backslashes are required between commands). Semantically,
an opening brace is like a command: it takes an (optional)
address and sets dot for each sub-command. Commands within
the braces are executed sequentially, but changes made by
one command are not visible to other commands (see the next
paragraph). Braces may be nested arbitrarily.
When a command makes a number of changes to a file, as in
x/re/c/text/, the addresses of all changes to the file are
computed in the original file. If the changes are in
sequence, they are applied to the file. Successive inser-
tions at the same address are catenated into a single inser-
tion composed of the several insertions in the order
applied.
The terminal
Page 6 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
What follows refers to behavior of sam when downloaded, that
is, when operating as a display editor on a raster display.
This is the default behavior; invoking sam with the -d (no
download) option provides access to the command language
only.
Each file may have zero or more windows open. Each window
is equivalent and is updated simultaneously with changes in
other windows on the same file. Each window has an indepen-
dent value of dot, indicated by a highlighted substring on
the display. Dot may be in a region not within the window.
There is usually a `current window', marked with a dark bor-
der, to which typed text and editing commands apply. Text
may be typed and edited as in rio(1); also the escape key
(ESC) selects (sets dot to) text typed since the last mouse
button hit.
The button 3 menu controls window operations. The top of
the menu provides the following operators, each of which
uses one or more rio-like cursors to prompt for selection of
a window or sweeping of a rectangle. `Sweeping' a null
rectangle gets a large window, disjoint from the command
window or the whole screen, depending on where the null
rectangle is.
new Create a new, empty file.
zerox Create a copy of an existing window.
resize As in rio.
close Delete the window. In the last window of a file,
close is equivalent to a D for the file.
write Equivalent to a w for the file.
Below these operators is a list of available files, starting
with ~~sam~~, the command window. Selecting a file from the
list makes the most recently used window on that file cur-
rent, unless it is already current, in which case selections
cycle through the open windows. If no windows are open on
the file, the user is prompted to open one. Files other
than ~~sam~~ are marked with one of the characters -+*
according as zero, one, or more windows are open on the
file. A further mark `.' appears on the file in the cur-
rent window and a single quote, ', on a file modified since
last write.
The command window, created automatically when sam starts,
is an ordinary window except that text typed to it is inter-
preted as commands for the editor rather than passive text,
and text printed by editor commands appears in it. The
behavior is like rio, with an `output point' that separates
commands being typed from previous output. Commands typed
in the command window apply to the current open file-the
file in the most recently current window.
Page 7 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
Manipulating text
Button 1 changes selection, much like rio. Pointing to a
non-current window with button 1 makes it current; within
the current window, button 1 selects text, thus setting dot.
Double-clicking selects text to the boundaries of words,
lines, quoted strings or bracketed strings, depending on the
text at the click.
Button 2 provides a menu of editing commands:
cut Delete dot and save the deleted text in the snarf
buffer.
paste Replace the text in dot by the contents of the
snarf buffer.
snarf Save the text in dot in the snarf buffer.
plumb Send the text in the selection as a plumb message.
If the selection is empty, the white-space-
delimited block of text is sent as a plumb message
with a click attribute defining where the selection
lies (see plumb(7)).
look Search forward for the next occurrence of the lit-
eral text in dot. If dot is the null string, the
text in the snarf buffer is used. The snarf buffer
is unaffected.
<rio> Exchange snarf buffers with rio.
/regexp Search forward for the next match of the last regu-
lar expression typed in a command. (Not in command
window.)
send Send the text in dot, or the snarf buffer if dot is
the null string, as if it were typed to the command
window. Saves the sent text in the snarf buffer.
(Command window only.)
Simulated buttons
For systems without a three-button mouse, the keyboard modi-
fier keys can be used to modify the effect of the main mouse
button. On Unix systems, the Control key changes the main
button to button 2, and the Alt key changes it to button 3.
On Mac systems, the Option key changes the main button to
button 2, and the Command key changes it to button 3. Also
on Mac systems, the usual keyboard shortcuts Command-C, -V,
and -X invoke copy, paste, and cut, as in other programs.
External communication
Sam listens to the edit plumb port. If plumbing is not
active, on invocation sam creates a named pipe /srv/sam.user
which acts as an additional source of commands. Characters
written to the named pipe are treated as if they had been
typed in the command window.
B is a shell-level command that causes an instance of sam
running on the same terminal to load the named files. B uses
Page 8 Plan 9 (printed 11/17/24)
SAM(1) SAM(1)
either plumbing or the named pipe, whichever service is
available. If plumbing is not enabled, the option allows a
line number to be specified for the initial position to dis-
play in the last named file (plumbing provides a more gen-
eral mechanism for this ability).
E is a shell-level command that can be used as $EDITOR in a
Unix environment. It runs B on file and then does not exit
until file is changed, which is taken as a signal that file
is done being edited.
Abnormal termination
If sam terminates other than by a q command (by hangup,
deleting its window, etc.), modified files are saved in an
executable file, $HOME/sam.save. This program, when exe-
cuted, asks whether to write each file back to a external
file. The answer `y' causes writing; anything else skips
the file.
FILES
$HOME/sam.save
$HOME/sam.err
/usr/local/plan9/bin/samsave
the program called to unpack $HOME/sam.save.
SOURCE
/usr/local/plan9/src/cmd/sam source for sam itself
/usr/local/plan9/src/cmd/samterm source for the separate
terminal part
/usr/local/plan9/bin/B
/usr/local/plan9/bin/E
SEE ALSO
ed(1), sed(1), grep(1), rio(1), regexp(7).
Rob Pike, ``The text editor sam''.
Page 9 Plan 9 (printed 11/17/24)